Isoflex IFV130HD-24S Engine Mount for Detroit, Yanmar and Other Marine Engines
Isoflex self-aligning adjusters increase the mount's stud strength up to 3x by providing a compression fit. Adjusters allow up to 4 degrees of bracket-to-bearer misalignment to reduce point loading.
- Stud size 1" (M24)
- 7.17" mounting center (182mm)
- Minimum free height 4.33" (110mm)
- Replaces factory mounts for Detroit, Yanmar, Cummins, MAN
- Provides at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise
- Encapsulated core allows for fine tuning of inverted stiffness
- Resilient element co-polymer resists fuel, oils, water and hydraulic fluids
- Hold-down bolt slots can be rotated to any direction for easier installation
- Fail safe
Replaces Isoflex M130HD-24S mount.
Supported Engine Models
Cummins: N14 - M, V-555-M, VT-555-MDetroit: 12V71 TA, 12V92 TA, 16V92 TA, 6V71 TA, 6V92 TA
MAN: D 2842 LE 401, D 2842 LE 402, D 2842 LE 406, D 2842 LE413
Yanmar: 6CX ETE, 6CXM GTE, 6SY-STP
Download IFV130HD-24S Data Sheet
Download Data Sheet| Feature | Metric | Imperial |
|---|---|---|
| Working Load per Mount | 150 - 600 | 330 - 1320 |
| Base Foot Print (LxW) | 230 x 110 | 9.06 x 4.33 |
| Base Bolt Centers (C) | 182 | 7.17 |
| Base Bolt Diameter (D) | 16 | 5/8 |
| Base Thickness (T) | 30 | 1.18 |
| Stud Diameter (S) | 24 | M24 (1" approx) |
| Min Free Height (J) | 110 | 4.33 |
| Overall Height (H) | 200 | 7.87 |
| Weight | 3.1 | 6.8 |
